White Color Plastic Wire Mesh Fence Welded Panels As Public
Building Fence
Brief Introduction Of Plastic Wire Mesh Fence
1. Material: :ow carbon iron wire
2. Surface: Galvanized or PVC coated
3. Wire Diameter: 4-6mm
4. Mesh Opening: 50-200mm
5. Length:1.5-3m
6. Height:0.4-2.5m
7. Packing: Packed in pallet or wooden crate
8. Feature: Beautiful appearance, wide view and easily
installation.
The Plastic Wire Mesh Fence is made of low carbon iron wire, the
fencing panels are galvanised followed by powder coating.
The color could be green , blue , white , etc.
The ' V ' shaped design increases stability to the panel including
panels , mesh gates and accessories.
It's used as Boundary and Security Fence in airport , highway ,
stadium , etc.
The wire fence is custom made by our factory , each fence panel comes with a post and accessories.
The post type could be round post, square post or peach post.
Usage Of Plastic Wire Mesh Fence
♦ Public building fence ♦ Private place fence, Where visibility is
desirable ♦ Residential perimeter fence ♦ In Parks, Zoos and nature
reserves
Specification List Of Plastic Wire Mesh Fence
| Mesh Opening | 50x100, 50x150, 50x200,55x100,55x200 | mm |
| Panel Width X Height | 2x0.63, 2x0.83, 2x1.03, 2x1.23, 2x1.43, 2.5x1.63, 2.5x1.83, 2.5x2.03, 2.5x2.23, 2.5x2.43 | m(L x H) |
| Square Post | 50x70, 70x100, 50x50, 60x60 | mm |
| Round Post Diameter | 32, 36, 38, 40, 42, 48 | mm |
| Wire Diameter | 3-6mm, or as customer’s request | mm |
| Surface Treatment | PVC coated & Powder spraying |
| Color | Green, blue, black, white, yellow, etc. |
| Post shape | Round, peach post, square, T-type, Y-type post |
| Note | There’re common specifications of products. Non-standard can also
be customized as customer's request. |
Production Process:
Wire Drawing → Wire Straightening & Wire Cutting → Welding → Folds
/ Curves Bending → Electric Galvanizing / Hot-dipped Galvanizing →
Parkerizing → PVC Coating / Spraying → Packing → Loading
Straightening & Cutting
The cold rolled wire rods in the coil form is passed through pre
set die and cartridge units (special sets for different diameter
wire rods) present in the straightening and cutting machine, where
the wire rods are first straightened and then cut to set length
(precision up to 2mm) automatically.
Welding
The wires are welded by electric resistance in an automated state
of the art machine which controls welding parameters precisely.
Bending
The bending machine available is used to bend the mesh panels to
form the V shape design.
